SOLUBLE OIL GP
General Purpose Coolant

     Champions Choice Soluble Oil GP is a premium, general-purpose coolant for machining and grinding operations on metals where the machinability ratings are 70 and above. Formulated for applications where cooling rather than high load-carrying capacity is the primary requirement. Contains no added chlorine or sulfur. An effective bactericide provides good sump life. Soluble Oil GP leaves a light oily film to help provide short-term corrosion protection.
     A dilution of 20 to 1 is recommended for most machining applications. For Grinding, dilutions of up to 50 to 1 can be used. When mixing it is important that the soluble oil be added to the water rather than the reverse. In addition, the water should be agitated during the mixing process. Make certain that all of the soluble oil is emulsified.

Click here -
Viscosity Info
Grade
Conversion Chart

Click here - Product
MSDS Sheet Info

PETROGRIND 108
Water Soluble Grinding Coolant

     A premium quality low viscosity water soluble oil compounded specifically for all types of grinding operations. Helps keep wheels free cutting and fines are easily removed. The recommended dilution is 20:1 to 60:1. Always add oil to water when mixing. Make sure all of the oil is emulsified.

HYDRA-COOL
General Purpose Synthetic Coolant

     Hydra-Cool is a true synthetic metalworking coolant capable of easily handling most grinding, sawing, turning, boring, milling and drilling operations. Blended with premium lubricity additives, Hydra-Cool provides superior surface finishes and longer tool life. Hydra-Cool forms a stable translucent solution over a wide range of water harnesses and temperatures. This clarity greatly enhances workpiece visibility. Hydra-Cool does not contain corrosive sulfur and is suitable for machining most types of metals (except magnesium). This unique formula is non-corrosive to steel, cast iron, brass, copper, aluminum and carbide tooling.

     Hydra-Cool leaves a light, oily, film that provides shor-term indoor rust protection and, unlike other synthetic coolants, lessens the problem of sticking on machine ways and slides. The lubricity, defoaming and corrosion preventive additives in Hydra-Cool are exceptionally stable and long lasting which means longer sump life, reduced coolant usage and less downtime. The latest and most effective bacterial protection is provided to help prevent rancidity. A dilution of 20:1 is recommended for most machining applications.

©1999-2006 Protect All, Inc.  All rights reserved.  Last revised 07/17/08 04:44:15 PM
1910 E. Via Burton St., Anaheim, CA 92806-1215 -- 800-322-4491
webmaster@protectall.com